40 C.F.R. § 60.17 Incorporations By Reference

• Library: Code of Federal Regulations
• Edition: 2019 Edition
• Currency: Current through December 31, 2019

(a) Certain material is incorporated by reference into this part with the approval of the Director of the Federal Register under 5 U.S.C. 5Public information; agency rules, opinions, orders, records, and proceedings552(a) and 1 CFR part 51. To enforce any edition other than that specified in this section, the EPA must publish notice of change in the FEDERAL REGISTER and the material must be available to the public. All approved material is available for inspection at the EPA Docket Center, Public Reading Room, EPA WJC West, Room 3334, 1301 Constitution Ave. NW., Washington, DC, telephone number 202-566-1744, and is available from the sources listed below. It is also available for inspection at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call (202) 741-6030 or go to http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html.

(b) American Gas Association, available through ILI Infodisk, 610 Winters Avenue, Paramus, New Jersey 07652:

(1) American Gas Association Report No. 3 Orifice Metering for Natural Gas and Other Related Hydrocarbon Fluids, Part 1 General Equations and Uncertainty Guidelines (1990), IBR approved for § 40Monitoring of emissions and operations for fuel gas combustion devices and flares60.107a(d).

(2) American Gas Association Report No. 3 Orifice Metering for Natural Gas and Other Related Hydrocarbon Fluids, Part 2 Specification and Installation Requirements (2000), IBR approved for § 40Monitoring of emissions and operations for fuel gas combustion devices and flares60.107a(d).

(3) American Gas Association Report No. 11 Measurement of Natural Gas by Coriolis Meter (2003), IBR approved for § 40Monitoring of emissions and operations for fuel gas combustion devices and flares60.107a(d).

(4) American Gas Association Transmission Measurement Committee Report No. 7: Measurement of Gas by Turbine Meters (Revised February 2006), IBR approved for § 40Monitoring of emissions and operations for fuel gas combustion devices and flares60.107a(d).

(c) American Hospital Association (AHA) Service, Inc., Post Office Box 92683, Chicago, Illinois 60675-2683. You may inspect a copy at the EPA's Air and Radiation Docket and Information Center (Docket A-91-61, Item IV-J-124), Room M-1500, 1200 Pennsylvania Ave. NW., Washington, DC 20460.

(1) An Ounce of Prevention: Waste Reduction Strategies for Health Care Facilities. American Society for Health Care Environmental Services of the American Hospital Association. Chicago, Illinois. 1993. AHA Catalog No. 057007. ISBN 0-87258-673-5. IBR approved for §§ 40Waste management guidelines60.35e and 40Waste management plan60.55c.

(2) [Reserved]

(d) The following material is available for purchase from the American National Standards Institute (ANSI), 25 W. 43rd Street, 4th Floor, New York, NY 10036, Telephone (212) 642-4980, and is also available at the following Web site: http://www.ansi.org.

(1) ANSI No. C12.20-2010 American National Standard for Electricity Meters-0.2 and 0.5 Accuracy Classes (Approved August 31, 2010), IBR approved for § 40How do I monitor and collect data to demonstrate compliance?60.5535(d).

(2) [Reserved]

(e) American Petroleum Institute (API), 1220 L Street NW., Washington, DC 20005.

(1) API Publication 2517, Evaporation Loss from External Floating Roof Tanks, Second Edition, February 1980, IBR approved for §§ 40Definitions60.111(i), 40Definitions60.111a(f), and 40Monitoring of operations60.116b(e).

(2) API Manual of Petroleum Measurement Standards, Chapter 22-Testing Protocol, Section 2-Differential Pressure Flow Measurement Devices, First Edition, August 2005, IBR approved for § 40Monitoring of emissions and operations for fuel gas combustion devices and flares60.107a(d).

(f) American Public Health Association, 1015 18th Street NW., Washington, DC 20036.

(1) "Standard Methods for the Examination of Water and Wastewater," 16th edition, 1985. Method 303F: "Determination of Mercury by the Cold Vapor Technique." Incorporated by reference for appendix A-8 to part 60, Method 29, §§ 9.2.3, 40Administrative claims; who may file10.3, and 11.1.3.

(2) 2540 G. Total, Fixed, and Volatile Solids in Solid and Semisolid Samples, in Standard Methods for the Examination of Water and Wastewater, 20th Edition, 1998, IBR approved for § 40Test methods and procedures60.154(b).

(g) The following material is available for purchase from the American Society of Mechanical Engineers (ASME), Two Park Avenue, New York, NY 10016-5990, Telephone (800) 843-2763, and is also available at the following Web site: http://www.asme.org.

(1) ASME Interim Supplement 19.5 on Instruments and Apparatus: Application, Part II of Fluid Meters, 6th Edition (1971), IBR approved for §§ 40Compliance and performance testing60.58a(h), 40Compliance and performance testing60.58b(i), 40How do I monitor the load of my municipal waste combustion unit?60.1320(a), and 40How do I monitor the load of my municipal waste combustion unit?60.1810(a).

(2) ASME MFC-3M-2004, Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi, IBR approved for § 40Monitoring of emissions and operations for fuel gas combustion devices and flares60.107a(d).

(3) ASME/ANSI MFC-4M-1986 (Reaffirmed 2008), Measurement of Gas Flow by Turbine Meters, IBR approved for § 40Monitoring of emissions and operations for fuel gas combustion devices and flares60.107a(d).

(4) ASME/ANSI MFC-5M-1985 (Reaffirmed 2006), Measurement of Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic Flowmeters, IBR approved for § 40Monitoring of emissions and operations for fuel gas combustion devices and flares60.107a(d).

(5) ASME MFC-6M-1998 (Reaffirmed 2005), Measurement of Fluid Flow in Pipes Using Vortex Flowmeters, IBR approved for § 40Monitoring of emissions and operations for fuel gas combustion devices and flares60.107a(d).

(6) ASME/ANSI MFC-7M-1987 (Reaffirmed 2006), Measurement of Gas Flow by Means of Critical Flow Venturi Nozzles, IBR approved for § 40Monitoring of emissions and operations for fuel gas combustion devices and flares60.107a(d).

(7) ASME/ANSI MFC-9M-1988 (Reaffirmed 2006), Measurement of Liquid Flow in Closed Conduits by Weighing Method, IBR approved for § 40Monitoring of emissions and operations for fuel gas combustion devices and flares60.107a(d).

(8) ASME MFC-11M-2006, Measurement of Fluid Flow by Means of Coriolis Mass Flowmeters, IBR approved for § 40Monitoring of emissions and operations for fuel gas combustion devices and flares60.107a(d).

(9) ASME MFC-14M-2003, Measurement of Fluid Flow Using Small Bore Precision Orifice Meters, IBR approved for § 40Monitoring of emissions and operations for fuel gas combustion devices and flares60.107a(d).

(10) ASME MFC-16-2007, Measurement of Liquid Flow in Closed Conduits with Electromagnetic Flowmeters, IBR approved for § 40Monitoring of emissions and operations for fuel gas combustion devices and flares60.107a(d).

(11) ASME MFC-18M-2001, Measurement of Fluid Flow Using Variable Area Meters, IBR approved for § 40Monitoring of emissions and operations for fuel gas combustion devices and flares60.107a(d).

(12) ASME MFC-22-2007, Measurement of Liquid by Turbine Flowmeters, IBR approved for § 40Monitoring of emissions and operations for fuel gas combustion devices and flares60.107a(d).

(13) ASME PTC 4.1-1964 (Reaffirmed 1991), Power Test Codes: Test Code for Steam Generating Units (with 1968 and 1969 Addenda), IBR approved for §§ 40Compliance and performance test methods and procedures for particulate matter and nitrogen oxides60.46b, 40Compliance and performance testing60.58a(h), 40Compliance and performance testing60.58b(i), 40How do I monitor the load of my municipal waste combustion unit?60.1320(a), and 40How do I monitor the load of my municipal waste combustion unit?60.1810(a).

(14) ASME/ANSI PTC 19.10-1981, Flue and Exhaust Gas Analyses [Part 10, Instruments and Apparatus], (Issued August 31 1981), IBR approved for §§ 40Compliance and performance testing60.56c(b), 40Monitoring of operations60.63(f), 40Test methods and procedures60.106(e), 40Performance tests60.104a(d), (h), (i), and (j), 60.105a(b), (d), (f), and (g), 60.106a(a), 60.107a(a), (c), and (d), tables 1 and 3 to subpart EEEE, tables 2 and 4 to subpart FFFF, table 2 to subpart JJJJ, §§ 40Test methods and procedures60.285a(f), 40How do I conduct the initial and subsequent performance tests for sulfur?60.4415(a), 40How do I demonstrate continuous compliance with the emission limitations and the operating limits?60.2145(s) and (t), 40How do I demonstrate continuous compliance with the amended emission limitations and the operating limits?60.2710(s) and (t), 40What monitoring equipment must I install and what...