40 C.F.R. § 60.17 Incorporations By Reference
| Library | Code of Federal Regulations |
| Edition | 2023 |
| Citation | 40 C.F.R. § 60.17 |
| Year | 2023 |
(a) Certain material is incorporated by reference into this part with the approval of the Director of the Federal Register under 5 U.S.C. 552(a) and 1 CFR part 51 . To enforce any edition other than that specified in this section, the EPA must publish notice of change in the FEDERAL REGISTER and the material must be available to the public. All approved material is available for inspection at the EPA Docket Center, Public Reading Room, EPA WJC West, Room 3334, 1301 Constitution Ave. NW., Washington, DC, telephone number 202-566-1744, and is available from the sources listed below. It is also available for inspection at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, email
(b) American Gas Association, available through ILI Infodisk, 610 Winters Avenue, Paramus, New Jersey 07652:
-
(1) American Gas Association Report No. 3
Orifice Metering for Natural Gas and Other Related Hydrocarbon Fluids, Part 1
General Equations and Uncertainty Guidelines (1990), IBR approved for §
60.107a(d).
-
(2) American Gas Association Report No. 3
Orifice Metering for Natural Gas and Other Related Hydrocarbon Fluids, Part 2
Specification and Installation Requirements (2000), IBR approved for §
60.107a(d).
-
(3) American Gas Association Report No. 11
Measurement of Natural Gas by Coriolis Meter (2003), IBR approved for §
60.107a(d).
-
(4) American Gas Association Transmission
Measurement Committee Report No. 7: Measurement of Gas by Turbine Meters
(Revised February 2006), IBR approved for §
60.107a(d).
(c) American Hospital Association (AHA) Service, Inc., Post Office Box 92683, Chicago, Illinois 60675-2683. You may inspect a copy at the EPA's Air and Radiation Docket and Information Center (Docket A-91-61, Item IV-J-124), Room M-1500, 1200 Pennsylvania Ave. NW., Washington, DC 20460.
-
(1) An Ounce of
Prevention: Waste Reduction Strategies for Health Care Facilities. American
Society for Health Care Environmental Services of the American Hospital
Association. Chicago, Illinois. 1993. AHA Catalog No. 057007. ISBN
0-87258-673-5. IBR approved for §§
60.35e and
60.55c.
-
(2) [Reserved]
(d) The following material is available for purchase from the American National Standards Institute (ANSI), 25 W. 43rd Street, 4th Floor, New York, NY 10036, Telephone (212) 642-4980, and is also available at the following Web site:
-
(1) ANSI No. C12.20-2010 American National
Standard for Electricity Meters-0.2 and 0.5 Accuracy Classes (Approved August
31, 2010), IBR approved for §
60.5535(d).
-
(2) [Reserved]
(e) American Petroleum Institute (API), 1220 L Street NW., Washington, DC 20005.
-
(1) API
Publication 2517, Evaporation Loss from External Floating Roof Tanks, Second
Edition, February 1980, IBR approved for §§
60.111(i),
60.111a(f), and
60.116b(e).
-
(2) API Manual of Petroleum Measurement
Standards, Chapter 14-Natural Gas Fluids Measurement, Section 1-Collecting and
Handling of Natural Gas Samples for Custody Transfer, 7th Edition, May 2016,
IBR approved for §
60.4415(a).
-
(3) API Manual of Petroleum Measurement
Standards, Chapter 22-Testing Protocol, Section 2-Differential Pressure Flow
Measurement Devices, First Edition, August 2005, IBR approved for §
60.107a(d).
(f) American Public Health Association, 1015 18th Street NW., Washington, DC 20036.
-
(1)
"Standard Methods for the Examination of Water and Wastewater," 16th edition,
1985. Method 303F: "Determination of Mercury by the Cold Vapor Technique."
Incorporated by reference for appendix A-8 to part 60, Method 29, §§
9.2.3,
10.3, and
11.1.3.
-
(2) 2540 G. Total, Fixed, and Volatile Solids
in Solid and Semisolid Samples, in Standard Methods for the Examination of
Water and Wastewater, 20th Edition, 1998, IBR approved for §
60.154(b).
(g) The following material is available for purchase from the American Society of Mechanical Engineers (ASME), Two Park Avenue, New York, NY 10016-5990, Telephone (800) 843-2763, and is also available at the following Web site:
-
(1) ASME Interim Supplement 19.5 on
Instruments and Apparatus: Application, Part II of Fluid Meters, 6th Edition
(1971), IBR approved for §§
60.58a(h),
60.58b(i),
60.1320(a), and
60.1810(a).
-
(2) ASME MFC-3M-2004, Measurement of Fluid
Flow in Pipes Using Orifice, Nozzle, and Venturi, IBR approved for §
60.107a(d).
-
(3) ASME/ANSI MFC-4M-1986 (Reaffirmed 2008),
Measurement of Gas Flow by Turbine Meters, IBR approved for §
60.107a(d).
-
(4) ASME/ANSI MFC-5M-1985 (Reaffirmed 2006),
Measurement of Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic
Flowmeters, IBR approved for §
60.107a(d).
-
(5) ASME MFC-6M-1998 (Reaffirmed 2005),
Measurement of Fluid Flow in Pipes Using Vortex Flowmeters, IBR approved for
§
60.107a(d).
-
(6) ASME/ANSI MFC-7M-1987 (Reaffirmed 2006),
Measurement of Gas Flow by Means of Critical Flow Venturi Nozzles, IBR approved
for §
60.107a(d).
-
(7) ASME/ANSI MFC-9M-1988 (Reaffirmed 2006),
Measurement of Liquid Flow in Closed Conduits by Weighing Method, IBR approved
for §
60.107a(d).
-
(8) ASME MFC-11M-2006, Measurement of Fluid
Flow by Means of Coriolis Mass Flowmeters, IBR approved for §
60.107a(d).
-
(9) ASME MFC-14M-2003, Measurement of Fluid
Flow Using Small Bore Precision Orifice Meters, IBR approved for §
60.107a(d).
-
(10) ASME MFC-16-2007, Measurement of Liquid
Flow in Closed Conduits with Electromagnetic Flowmeters, IBR approved for
§
60.107a(d).
-
(11) ASME MFC-18M-2001, Measurement of Fluid
Flow Using Variable Area Meters, IBR approved for §
60.107a(d).
-
(12) ASME MFC-22-2007, Measurement of Liquid
by Turbine Flowmeters, IBR approved for §
60.107a(d).
-
(13) ASME PTC 4.1-1964 (Reaffirmed 1991),
Power Test Codes: Test Code for Steam Generating Units (with 1968 and 1969
Addenda), IBR approved for §§
60.46b,
60.58a(h),
60.58b(i),
60.1320(a), and
60.1810(a).
-
(14) ASME/ANSI PTC 19.10-1981, Flue and
Exhaust Gas Analyses [Part 10, Instruments and Apparatus], (Issued August 31,
1981), IBR approved for §§
60.56c(b);
60.63(f);
60.106(e);
60.104a(d), (h),
(i), and (j); 60.105a(b), (d), (f), and (g); 60.106a(a); 60.107a(a), (c), and
(d); 60.275(e); 60.275a(e); 60.275b(e); tables 1 and 3 to subpart EEEE; tables
2 and 4 to subpart FFFF; table 2 to subpart JJJJ; §§
60.285a(f);
60.396(a);
60.2145(s) and
(t);
60.2710(s) and
(t);
60.2730(q);
60.4415(a);
60.4900(b);
60.5220(b);
tables 1 and 2 to subpart LLLL; tables 2 and 3 to subpart MMMM; §§
60.5406(c);
60.5406a(c);
60.5407a(g);
60.5413(b);
60.5413a(b); and
(d).
-
(15) ASME PTC 22-2014, Gas
Turbines: Performance Test Codes, (Issued December 31, 2014), IBR approved for
§
60.5580.
-
(16) ASME PTC 46-1996, Performance Test Code
on Overall Plant Performance, (Issued October 15, 1997), IBR approved for
§
60.5580.
-
(17) ASME QRO-1-1994, Standard for the
Qualification and Certification of Resource Recovery Facility Operators, IBR
approved for §§
60.54b(a) and
(b),
60.56a,
60.1185(a) and
(c), and
60.1675(a) and
(c).
(h) The following material is available for purchase from ASTM International, 100 Barr Harbor Drive, P.O. Box CB700, West Conshohocken, Pennsylvania 19428-2959, (800) 262-1373,
-
(1) ASTM A99-76, Standard Specification for
Ferromanganese, IBR approved for §
60.261.
-
(2) ASTM A99-82 (Reapproved 1987), Standard
Specification for Ferromanganese, IBR approved for §
60.261.
-
(3) ASTM A100-69, Standard Specification for
Ferrosilicon, IBR approved for §
60.261.
-
(4) ASTM A100-74, Standard Specification for
Ferrosilicon, IBR approved for §
60.261.
-
(5) ASTM A100-93, Standard Specification for
Ferrosilicon, IBR approved for §
60.261.
-
(6) ASTM A101-73, Standard Specification for...
To continue reading
Request your trial