Text
TITLE 40 - PROTECTION OF ENVIRONMENT
CHAPTER I - ENVIRONMENTAL PROTECTION AGENCY
PART 63 - NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES
subpart wwww - NATIONAL EMISSIONS STANDARDS FOR HAZARDOUS AIR POLLUTANTS: REINFORCED PLASTIC COMPOSITES PRODUCTION
Table 12 to Subpart WWWW of Part 63 - Data Requirements for New and Existing Continuous Lamination Lines and Continuous Casting Lines Complying with a Lbs/Ton Organic HAP Emissions Limit on a Per Line Basis
As required in 63.5865(b), in order to comply with a lbs/ton organic HAP emissions limit for continuous lamination lines and continuous casting lines you must determine the data in the following table: ------------------------------------------------------------------------ For each line where the wet- You must determine out area . . . And the oven . . . . . .
------------------------------------------------------------------------ 1. Is uncontrolled............. a. Is uncontrolled. i. Annual uncontrolled wet- out area organic HAP emissions, ii. Annual uncontrolled oven organic HAP emissions, and iii. Annual neat resin plus and neat gel coat plus applied.
2. Has an enclosure that is not a. Is uncontrolled. i. Annual a PTE and the captured organic uncontrolled wet- HAP emissions are controlled out area organic by an add-on control device. HAP emissions, ii. Annual controlled wet- out area organic HAP emissions, iii. Annual uncontrolled oven organic HAP emissions, iv. The capture efficiency of the wet-out area enclosure, v. The destruction efficiency of the add-on control device, and vi. The amount of neat resin plus and neat gel coat plus applied.
3. Has an enclosure that is a a. Is uncontrolled. i. Annual PTE, and the captured organic uncontrolled wet- HAP emissions are controlled out area organic by an add-on control device. HAP emissions, ii. Annual controlled wet- out area organic HAP emissions, iii. Annual uncontrolled oven organic HAP emissions, iv. That the wet- out area enclosure meets the requirements of EPA Method 204 of appendix M to 40 CFR part 51 for a PTE, v. The destruction efficiency of the add-on control device, and vi. The amount of neat resin plus and neat gel coat plus applied.
4. Is uncontrolled............. a. Is controlled by i. Annual an add-on control uncontrolled wet- device. out area organic HAP emissions, ii. Annual uncontrolled oven organic HAP emissions, iii. Annual controlled oven organic HAP emissions, iv. The capture efficiency of the oven, v. The destruction efficiency of the add-on control device, and vi. The amount of neat resin plus and neat gel coat plus applied.
5. Has an enclosure that is not a. Is controlled by i. Annual a PTE and the captured organic an add-on control uncontrolled wet- HAP emissions are controlled device. out area organic by an add-on control device. HAP emissions, ii. Annual controlled wet- out area organic HAP emissions, iii. Annual uncontrolled oven organic HAP emissions, iv. Annual controlled oven organic HAP emissions, v. The capture efficiency of the wet-out area enclosure, vi. The capture efficiency of the oven, vii. The destruction efficiency of the add-on control device, and viii. The amount of neat resin plus and neat gel coat plus applied.
6. Has an enclosure that is a a. Is controlled by i. That the wet- PTE, and the captured organic an add-on control out area HAP emissions are controlled device. enclosure meets by add-on control device. the requirements of EPA Method 204 of appendix M to 40 CFR part 51 for a PTE, ii. The capture efficiency of the oven, iii. Inlet organic HAP emissions to the an add-on control device, and iv. Outlet organic HAP emissions from the add-on control device.
------------------------------------------------------------------------
Sponsored links
