40 CFR Table 1 to Subpart UUU of Part 63 - Metal HAP Emission Limits for Catalytic Cracking Units

Code of Federal Regulations - Title 40: Protection of Environment

Updated to: December 30, 2005

Linked as:

Text

TITLE 40 - PROTECTION OF ENVIRONMENT

CHAPTER I - ENVIRONMENTAL PROTECTION AGENCY

PART 63 - NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES

subpart uuu - NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR PETROLEUM REFINERIES: CATALYTIC CRACKING UNITS, CATALYTIC REFORMING UNITS, AND SULFUR RECOVERY UNITS

Table 1 to Subpart UUU of Part 63 - Metal HAP Emission Limits for Catalytic Cracking Units

As stated in 63.1564(a)(1), you shall meet each emission limitation in the following table that applies to you.

------------------------------------------------------------------------ You shall meet the following For each new or existing catalytic emission limits for each catalyst cracking unit . . . regenerator vent . . .

------------------------------------------------------------------------ 1. Subject to new source PM emissions must not the exceed 1.0 performance standard (NSPS) for kilogram (kg) per 1,000 kg (1.0 lb/ PM in 40 CFR 60.102. 1,000 lb) of coke burn-off in the catalyst regenerator; if the discharged gases pass through an incinerator or waste heat boiler in which you burn auxiliary or in supplemental liquid or solid fossil fuel, the incremental rate of PM emissions must not exceed 43.0 grams per Gigajoule (g/GJ) or 0.10 pounds per million British thermal units (lb/million Btu) of heat input attributable to the liquid or solid fossil fuel; and the opacity of emissions must not exceed 30 percent, except for one 6-minute average opacity reading in any 1- hour period.

2. Option 1: NSPS requirements not PM emissions must not exceed 1.0 kg/ subject to the NSPS for PM in 40 1,000 kg (1.0 lb/1,000 lb) of coke CFR 60.102. burn-off in the catalyst regenerator; if the discharged gases pass through an incinerator or waste heat boiler in which you burn auxiliary or supplemental liquid or solid fossil fuel, the incremental rate of PM must not exceed 43.0 g/GJ (0.10 lb/million Btu) of heat input attributable to the liquid or solid fossil fuel; and the opacity of emissions must not exceed 30 percent, except for one 6-minute average opacity reading in any 1-hour period.

3. Option 2: PM limit not subject PM emissions must not exceed 1.0 kg/ to the NSPS for PM in 40 CFR 1,000 kg (1.0 lb/1,000 lbs) of coke 60.102. burn-off in the catalyst regenerator.

4. Option 3: Ni lb/hr not subject Nickel (Ni) emissions must not to the NSPS for PM in 40 CFR exceed 13,000 milligrams per hour 60.102. (mg/hr) (0.029 lb/hr).

5. Option 4: Ni Lb/1,000 lbs of Ni emissions must not exceed 1.0 mg/ coke burn-off not subject to the kg (0.001 lb/1,000 lbs) of coke NSPS for PM in 40 CFR 60.102. burn-off in the catalyst regenerator.

------------------------------------------------------------------------ [67 FR 17773, Apr. 11, 2002, as amended at 70 FR 6942, Feb. 9, 2005]