Text
TITLE 40 - PROTECTION OF ENVIRONMENT
CHAPTER I - ENVIRONMENTAL PROTECTION AGENCY
PART 63 - NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES
subpart ddddd - NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR INDUSTRIAL, COMMERCIAL, AND INSTITUTIONAL BOILERS AND PROCESS HEATERS
Table 5 to Subpart DDDDD of Part 63 - Performance Testing Requirements
As stated in 63.7520, you must comply with the following requirements for performance test for existing, new or reconstructed affected sources: ------------------------------------------------------------------------ To conduct a performance test for the following You must . . . Using . . .
pollutant . . .
------------------------------------------------------------------------ 1. Particulate Matter....... a. Select sampling Method 1 in appendix ports location and A to part 60 of the number of this chapter.
traverse points.
b. Determine Method 2, 2F, or 2G velocity and in appendix A to volumetric flow- part 60 of this rate of the stack chapter.
gas.
c. Determine oxygen Method 3A or 3B in and carbon dioxide appendix A to part concentrations of 60 of this chapter, the stack gas. or ASME PTC 19, Part 10 (1981) (IBR, see 63.14(i)).
d. Measure the Method 4 in appendix moisture content of A to part 60 of the stack gas. this chapter.
e. Measure the Method 5 or 17 particulate matter (positive pressure emission fabric filters must concentration. use Method 5D) in appendix A to part 60 of this chapter.
f. Convert emissions Method 19 F-factor concentration to lb methodology in per MMBtu emission appendix A to part rates. 60 of this chapter.
2. Total selected metals.... a. Select sampling Method 1 in appendix ports location and A to part 60 of the number of this chapter.
traverse points.
b. Determine Method 2, 2F, or 2G velocity and in appendix A to volumetric flow- part 60 of this rate of the stack chapter.
gas.
c. Determine oxygen Method 3A or 3B in and carbon dioxide appendix A to part concentrations of 60 of this chapter, the stack gas. or ASME PTC 19, Part 10 (1981) (IBR, see 63.14(i)).
d. Measure the Method 4 in appendix moisture content of A to part 60 of the stack gas. this chapter.
e. Measure the total Method 29 in selected metals appendix A to part emission 60 of this chapter.
concentration.
f. Convert emissions Method 19 F-factor concentration to lb methodology in per MMBtu emission appendix A to part rates. 60 of this chapter.
3. Hydrogen chloride........ a. Select sampling Method 1 in appendix ports location and A to part 60 of the number of this chapter.
traverse points.
b. Determine Method 2, 2F, or 2G velocity and in appendix A to volumetric flow- part 60 of this rate of the stack chapter.
gas.
c. Determine oxygen Method 3A or 3B in and carbon dioxide appendix A to part concentrations of 60 of this chapter, the stack gas. or ASME PTC 19, Part 10 (1981) (IBR, see 63.14(i)).
d. Measure the Method 4 in appendix moisture content of A to part 60 of the stack gas. this chapter.
e. Measure the Method 26 or 26A in hydrogen chloride appendix A to part emission 60 of this chapter.
concentration.
f. Convert emissions Method 19 F-factor concentration to lb methodology in per MMBtu emission appendix A to part rates. 60 of this chapter.
4. Mercury.................. a. Select sampling Method 1 in appendix ports location and A to part 60 of the number of this chapter.
traverse points.
b. Determine Method 2, 2F, or 2G velocity and in appendix A to volumetric flow- part 60 of this rate of the stack chapter.
gas.
c. Determine oxygen Method 3A or 3B in and carbon dioxide appendix A to part concentrations of 60 of this chapter, the stack gas. or ASME PTC 19, Part 10 (1981) (IBR, see 62.14(i)).
d. Measure the Method 4 in appendix moisture content of A to part 60 of the stack gas. this chapter.
e. Measure the Method 29 in mercury emission appendix A to part concentration. 60 of this chapter or Method 101A in appendix B to part 61 of this chapter or ASTM Method D6784-02 (IBR, see 63.14(b)).
f. Convert emissions Method 19 F-factor concentration to lb methodology in per MMBtu emission appendix A to part rates. 60 of this chapter.
5. Carbon Monoxide.......... a. Select the Method 1 in appendix sampling ports A to part 60 of location and the this chapter.
number of traverse points.
b. Determine oxygen Method 3A or 3B in and carbon dioxide appendix A to part concentrations of 60 of this chapter, the stack gas. or ASTM D6522-00 (IBR, see 63.14(b)), or ASME PTC 19, Part 10 (1981) (IBR, see 63.14(i)).
c. Measure the Method 4 in appendix moisture content of A to part 60 of the stack gas. this chapter.
d. Measure the Method 10, 10A, or carbon monoxide 10B in appendix A emission to part 60 of this concentration. chapter, or ASTM D6522-00 (IBR, see 63.14(b)) when the fuel is natural gas.
------------------------------------------------------------------------
Sponsored links
