TITLE 40 - PROTECTION OF ENVIRONMENT

CHAPTER I - ENVIRONMENTAL PROTECTION AGENCY

PART 63 - NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES

subpart mmmmm - NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS: FLEXIBLE POLYURETHANE FOAM FABRICATION OPERATIONS

Table 6 to Subpart MMMMM of Part 63 - Requirements for Reports

As stated in 63.8818(a), you must submit a compliance report that includes the information in 63.8818(e) through (g) as well as the information in the following table. Rows 1 and 3 of the following table apply to loop slitter affected sources. Rows 1 through 5 apply to flame lamination affected sources. You must also submit startup, shutdown, and malfunction reports according to the requirements in the following table if you own or operate a new or reconstructed flame lamination affected source.

------------------------------------------------------------------------ Then you must submit a report If . . . or statement that . . .

------------------------------------------------------------------------ 1. There are no deviations from any There were no deviations from emission limitations that apply to you. the emission limitations during the reporting period.

2. There were no periods during which There were no periods during the operating parameter monitoring which the CPMS were out-of- systems were out-of-control in control during the reporting accordance with the monitoring plan. period.

3. There was a deviation from any Contains the information in emission limitation during the 63.8818(e)(5).

reporting period.

4. There were periods during which the Contains the information in operating parameter monitoring systems 63.8818(f)(3).

were out-of-control in information in accordance with the monitoring plan.

5. There was a startup, shutdown, or Contains the information in malfunction where the source did not 63.8818(i).

meet the emission limitations set out in 63.8790 at a new or reconstructed flame lamination affected source during the reporting period that is not consistent with your startup, shutdown, and malfunction plan..

------------------------------------------------------------------------