Text
TITLE 40 - PROTECTION OF ENVIRONMENT
CHAPTER I - ENVIRONMENTAL PROTECTION AGENCY
SUBCHAPTER C - AIR PROGRAMS
PART 60 - STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES
subpart dddd - EMISSIONS GUIDELINES AND COMPLIANCE TIMES FOR COMMERCIAL AND INDUSTRIAL SOLID WASTE INCINERATION UNITS THAT COMMENCED CONSTRUCTION ON OR BEFORE NOVEMBER 30, 1999
Table 2 to Subpart DDDD of Part 60 - Model Rule - Emission Limitations
---------------------------------------------------------------------------------------------------------------- You must meet this And determining For the air pollutant emission limitation Using this averaging time compliance using this \a\ method ---------------------------------------------------------------------------------------------------------------- Cadmium........................... 0.004 milligrams per 3-run average (1 hour Performance test (Method dry standard cubic minimum sample time per 29 of appendix A of this meter. run). part) Carbon monoxide................... 157 parts per million 3-run average (1 hour Performance test (Method by dry volume. minimum sample time per 10, 10A, or 10B, of run). appendix A of this part) Dioxins/furans (toxic equivalency 0.41 nanograms per 3-run average (1 hour Performance test (Method basis). dry standard cubic minimum sample time per 23 of appendix A of this meter. run). part) Hydrogen chloride................. 62 parts per million 3-run average (1 hour Performance test (Method by dry volume. minimum sample time per 26A of appendix A of run). this part) Lead.............................. 0.04 milligrams per 3-run average (1 hour Performance test (Method dry standard cubic minimum sample time per 29 of appendix A of this meter. run). part) Mercury........................... 0.47 milligrams per 3-run average (1 hour Performance test (Method dry standard cubic minimum sample time per 29 of appendix A of this meter. run). part) Opacity........................... 10 percent........... 6-minute averages......... Performance test (Method 9 of appendix A of this part) Oxides of nitrogen................ 388 parts per million 3-run average (1 hour Performance test (Methods by dry volume. minimum sample time per 7, 7A, 7C, 7D, or 7E of run). appendix A of this part) Particulate matter................ 70 milligrams per dry 3-run average (1 hour Performance test (Method standard cubic meter. minimum sample time per 5 or 29 of appendix A of run). ths part) Sulfur dioxide.................... 20 parts per million 3-run average (1 hour Performance test (Method by dry volume. minimum sample time per 6 or 6c of appendix A of run). this part) ---------------------------------------------------------------------------------------------------------------- \a\ All emission limitations (except for opacity) are measured at 7 percent oxygen, dry basis at standard conditions.
Sponsored links
