Text
TITLE 16 - COMMERCIAL PRACTICES
CHAPTER I - FEDERAL TRADE COMMISSION
SUBCHAPTER C - REGULATIONS UNDER SPECIFIC ACTS OF CONGRESS
PART 305 - RULE CONCERNING DISCLOSURES REGARDING ENERGY CONSUMPTION AND WATER USE OF CERTAIN HOME APPLIANCES AND OTHER PRODUCTS REQUIRED UNDER THE ENERGY POLICY AND CONSERVATION ACT (''APPLIANCE LABELING RULE'')
Appendix G4 to Part 305 - Mobile Home Furnaces
[1. Range Information] ------------------------------------------------------------------------ Range of annual fuel utilization Manufacturer's rated heating efficiencies (AFUE's) capacities (Btu's/hr.) ------------------------------------- Low High ------------------------------------------------------------------------ All Capacities.................... 75 83.2 ------------------------------------------------------------------------ [2. Yearly Cost Information: Cost Grid] ------------------------------------------------------------------------ Btu heat loss of Cost per kilowatt hour \1\ home (see chart below) ------------------------------------------------------------------------ 4..............................................
6..............................................
8..............................................
10.............................................
12.............................................
14.............................................
------------------------------------------------------------------------ \1\ For charts on natural gas, oil and propane gas, substitute the following cost figures: a. Cost per therm_10, 20, 30, 40, 50, 60.
b. Cost per gallon (oil)_76, 79, 82, 85, 88, 91, 94, 97, $1.00.
c. Cost per gallon (propane)_35, 40, 45, 50, 55, 60.
The following table shows the heat loss values (in thousand Btu's/hr.) to be used in the cost grid: [Heat Loss Table] ---------------------------------------------------------------------------------------------------------------- Design heat loss Manufacturers' rated heat output of model to be labeled (Btu's per of model to be Heat loss values to be hour) labeled (1,000 used on the grid (1,000 Btu's per hour) Btu's per hour) ---------------------------------------------------------------------------------------------------------------- 5,000 to 10,000.................................................... 5 5 5,000 to 10,000.................................................... 5 5 11,000 to 16,000................................................... 10 5, 10 17,000 to 25,000................................................... 15 10, 15 26,000 to 42,000................................................... 20 15, 20, 25 43,000 to 59,000................................................... 30 25, 30, 35, 40 60,000 to 76,000................................................... 40 35, 40, 45, 50 77,000 to 93,000................................................... 50 40, 45, 50, 60 94,000 to 110,000.................................................. 60 50, 60, 70, 80 111,000 to 127,000................................................. 70 60, 70, 80, 90 128,000 to 144,000................................................. 80 70, 80, 90, 100 145,000 to 161,000................................................. 90 80, 90, 100, 110, 120 162,000 to 178,000................................................. 100 90, 100, 110, 120, 130 179,000 to 195,000................................................. 110 100, 110, 120, 130, 140 196,000 and over................................................... 130 120, 130, 140, 150, 160 ---------------------------------------------------------------------------------------------------------------- Beside each cost in the cost grid, and below the appropriate heat loss value taken from the heat loss table, place the cost estimate for the model being labeled using the table costs in place of the national average cost and using the heat loss values in place of the design heat loss used in the table with the national average cost.
[59 FR 34042, July 1, 1994, as amended at 59 FR 48798, Sept. 23, 1994]
Sponsored links
