Text
TITLE 40 - PROTECTION OF ENVIRONMENT
CHAPTER I - ENVIRONMENTAL PROTECTION AGENCY
SUBCHAPTER C - AIR PROGRAMS
PART 86 - CONTROL OF EMISSIONS FROM NEW AND IN - USE HIGHWAY VEHICLES AND ENGINES
subpart n - EMISSION REGULATIONS FOR NEW OTTO - CYCLE AND DIESEL HEAVY - DUTY ENGINES; GASEOUS AND PARTICULATE EXHAUST TEST PROCEDURES
86.1314 - 84 - Analytical gases.
(a) Gases for the CO and CO2 analyzers shall be single blends of CO and CO2. respectively, using nitrogen as the diluent.
(b) Gases for the hydrocarbon analyzer shall be single blends of propane using air as the diluent.
(c) Gases for the NOX analyzer shall be single blends of NO named as NOX with a maximum NO2 concentration of 5 percent of the nominal value using nitrogen as the diluent.
(d) Fuel for the FID shall be a blend of 402 percent hydrogen with the balance being helium. The mixture shall contain less than 1 ppm equivalent carbon response; 98 to 100 percent hydrogen fuel may be used with advance approval of the Administrator.
(e) The allowable zero gas (air or nitrogen) impurity concentrations shall not exceed 1 ppm equivalent carbon response, 1 ppm carbon monoxide, 0.04 percent (400 ppm) carbon dioxide and 0.1 ppm nitric oxide.
(f)(1) Zero-grade air includes artificial air consisting of a blend of nitrogen and oxygen with oxygen concentrations between 18 and 21 mole percent.
(2) Calibration gases shall be accurate to within 1 percent of NBS gas standards, or other gas standards which have been approved by the Administrator.
(3) Span gases shall be accurate to within 2 percent of NBS gas standards, or other gas standards which have been approved by the Administrator.
(g) The use of precision blending devices (gas dividers) to obtain the required calibration gas concentrations is acceptable, provided that the blended gases are accurate to within 1.5 percent of NBS gas standards, or other gas standards which have been approved by the Administrator.
This accuracy implies that primary gases used for blending must be named to an accuracy of at least 1 percent, traceable to NBS or other approved gas standards.
[48 FR 52210, Nov. 16, 1983, as amended at 49 FR 48144, Dec. 10, 1984]
Sponsored links
