Text
Title 42: Public Health
CHAPTER I: PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES
SUBCHAPTER G: OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES
PART 84: APPROVAL OF RESPIRATORY PROTECTIVE DEVICES
Subpart N: Special Use Respirators
84.256 - Quality control requirements.
(a) In addition to the construction and performance requirements specified in ?? 84.251, 84.252, 84.253, 84.254, and 84.255, the quality control requirements in paragraphs (b), (c), and (d) of this section apply to approval of gas masks, chemical cartridge respirators, and powered air-purifying respirators for entry into and escape from vinyl chloride atmospheres containing adequate oxygen to support life.
(b) The respirators submitted for approval as described in paragraph (a) of this section shall be accompanied by a complete quality control plan meeting the requirements of subpart E of this part.
(c)(1) The applicant shall specify in the plan that a sufficient number of samples will be drawn from each bulk container of sorbent material and that where activated carbon is used, the following specific tests will be performed:
(i) Apparent density;
(ii) Iodine number;
(iii) Moisture content;
(iv) Carbon tetrachloride number; and
(v) Mesh size.
(2) The tests in paragraph (c)(1) of this section shall be performed in a quantity necessary to assure continued satisfactory conformance of the canisters and cartridges to the requirements of this subpart.
(d) Final performance quality control tests on the complete canisters and cartridges shall be accomplished using the bench tests and procedures prescribed in ?? 84.252, 84.253, 84.254, and 84.255.
Sponsored links
