Text
Title 40: Protection of Environment
CHAPTER I: ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)
SUBCHAPTER C: AIR PROGRAMS (CONTINUED)
PART 63: NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES
Subpart VVVV: National Emission Standards for Hazardous Air Pollutants for Boat Manufacturing
: Demonstrating Compliance for Open Molding Operations Controlled by Add-on Control Devices
63.5715 - What operating limits must I meet
(a) For open molding operations on which you use a thermal oxidizer as an add-on control device, you must meet the operating limits specified in Table 4 to this subpart that apply to the emission capture system and thermal oxidizer. You must establish the operating limits during the performance test according to the procedures in ? 63.5725. You must meet the operating limits at all times after you establish them.
(b) If you use an add-on control device other than a thermal oxidizer, or wish to monitor an alternative parameter and comply with a different operating limit, you must apply to the Administrator for approval of alternative monitoring under ? 63.8(f).
Sponsored links
