TITLE 40 - PROTECTION OF ENVIRONMENT

CHAPTER I - ENVIRONMENTAL PROTECTION AGENCY

SUBCHAPTER N - EFFLUENT GUIDELINES AND STANDARDS

PART 415 - INORGANIC CHEMICALS MANUFACTURING POINT SOURCE CATEGORY

subpart al - FERRIC CHLORIDE PRODUCTION SUBCATEGORY

415.381 - Specialized definitions.

  (a) Except as provided below, the general definitions, abbreviations and methods of analysis set forth in 40 CFR part 401 shall apply to this subpart.

  (b) The term process wastewater means any water which, during manufacturing or processing, comes into direct contact with or results from the production or use of any raw material, intermediate product, finished product, by-product, or waste product. The term process wastewater does not include contaminated nonprocess wastewater, as defined below.

  (c) The term process wastewater pollutants means pollutants present in process wastewater.

  (d) The term contaminated nonprocess wastewater shall mean any water which, during manufacturing or processing, comes into incidental contact with any raw material, intermediate product, finished product, by-product or waste product by means of (1) rainfall runoff; (2) accidental spills; (3) accidental leaks caused by the failure of process equipment, which are repaired within the shortest reasonable time not to exceed 24 hours after discovery; and (4) discharges from safety showers and related personal safety equipment: Provided, that all reasonable measures have been taken (i) to prevent, reduce and control such contact to the maximum extent feasible; and (ii) to mitigate the effects of such contact once it has occurred.