16 CFR 1203.5 - Construction requirements—projections.

Code of Federal Regulations - Title 16: Commercial Practices

Updated to: January 01, 2011

Linked as:

Text

Title 16: Commercial Practices

CHAPTER II: CONSUMER PRODUCT SAFETY COMMISSION

SUBCHAPTER B: CONSUMER PRODUCT SAFETY ACT REGULATIONS

PART 1203: SAFETY STANDARD FOR BICYCLE HELMETS

Subpart A: The Standard

1203.5 - Construction requirements?projections.

Any unfaired projection extending more than 7 mm (0.28 in.) from the helmet's outer surface shall break away or collapse when impacted with forces equivalent to those produced by the applicable impact-attenuation tests in ? 1203.17 of this standard. There shall be no fixture on the helmet's inner surface projecting more than 2 mm into the helmet interior.