TITLE 40 - PROTECTION OF ENVIRONMENT

CHAPTER I - ENVIRONMENTAL PROTECTION AGENCY

SUBCHAPTER U - AIR POLLUTION CONTROLS

PART 1048 - CONTROL OF EMISSIONS FROM NEW, LARGE NONROAD SPARK - IGNITION ENGINES

subpart a - OVERVIEW AND APPLICABILITY

1048.10 - How is this part organized?

The regulations in this part 1048 contain provisions that affect both engine manufacturers and others. However, the requirements of this part are generally addressed to the engine manufacturer. The term you generally means the engine manufacturer, as defined in 1048.801. This part 1048 is divided into the following subparts: (a) Subpart A of this part defines the applicability of part 1048 and gives an overview of regulatory requirements.

  (b) Subpart B of this part describes the emission standards and other requirements that must be met to certify engines under this part. Note that 1048.145 discusses certain interim requirements and compliance provisions that apply only for a limited time.

  (c) Subpart C of this part describes how to apply for a certificate of conformity.

  (d) Subpart D of this part describes general provisions for testing production-line engines.

  (e) Subpart E of this part describes general provisions for testing in-use engines.

  (f) Subpart F of this part describes how to test your engines (including references to other parts of the Code of Federal Regulations).

  (g) Subpart G of this part and 40 CFR part 1068 describe requirements, prohibitions, and other provisions that apply to engine manufacturers, equipment manufacturers, owners, operators, rebuilders, and all others.

  (h) [Reserved] (i) Subpart I of this part contains definitions and other reference information.

[70 FR 40465, July 13, 2005]